“I’ve tried many different manufacturers. Doogs’ are far and away the least fussy Sherman tracks I’ve ever assembled. The included jigs and tools really help make the process smooth and easy” – Rob Jones
- 3D-printed track sets available in the Doogs Studios shop
- 6 track types and two duckbill extended end connectors
- All sets come with assembly jigs and end connector holders
- Integrated full-width pin design cuts assembly time by 75%
- (Minimal) glue is required
Easy to Get Together
Sherman tracks generally suck. I know – I’ve built most of them and seen a lot of cringeworthy engineering. That dissatisfaction’s been eating at me for years, and I finally decided to do something about it:
To make Sherman tracks that don’t suck.
It’s taken a lot of trial and error and more last minute trips back to the drawing board than I’d care to acknowledge, but the results speak for themselves.
These tracks all utilize an integrated track pin design, which bypasses a lot of tedious gluing and gets you into assembly more or less right away. Just feed the track pins through the links, apply a small amount of glue to the protruding pins, and place the female end connectors. That’s it. Rinse and repeat.
This approach – when combined with the assembly jig and end connector holders that come with each set – let you fly through track runs. Modelers have already reported getting sets built up in about 40 minutes.
Available Now
As of December, 2025, the following track sets are available. Each one includes 180 track links, 360 total end connectors, an assembly jig, and two different types of end connector holder to make getting them together less of a hassle.
DS135006 – T51 Rubber Tracks (Fresh)
DS135012 – T51 Rubber Tracks (Worn)
Joining the five tracks are two duckbill extended end connector add-on sets. These include said duckbills plus a specialized end connector holder to accommodate the different shapes.
DS135009 – Square EEC Duckbills
DS135010 – Round EEC Duckbills
What’s Coming Next
A number of additional VVSS tracks are already in various stages of progress:
- Worn T48s
- T41s (fresh and worn)
- WE210s (fresh and worn)
I also have my eye on T54E2s, T56s, Canadian Dry Pins, and possibly a set of burned-out skeleton tracks.
But we’re talking sometime in 2026 at this point. There are lots of things I want to get to and only so many hours in the day!
looking for 1/16th scale tracks. for Sherman A4A3E8.
i would very interested, can you help.
You’re in luck! T66 tracks are already available and T80s are on the verge of release. https://doogsstudios.com/product-category/prints/armor-prints/armor-prints-16/armor-prints-16-sherman/